Friday, 22.02.2019, 05:40
» How to lay carpet
You found on your typical carpet is dirty, that it is impossible to remove? Paints and colors have long lost their appeal? It's time to change the flooring, only in order not to spoil the new, we'll show you how to lay carpet right!
First you need to remove old paint and clean the floor with glue residue. Now you can prime and level surface. So you can use leveling compounds or floors, which can save the floor from major defects.
When ready spread out carpet and check the length of the product, that was present on the walls overlap. Then align the image - it should start from the center of the room. For the literate devices carpet to fold the edge of it across the room and reflect the layout of the center of the floor.
You can spread out carpet, but without the stretcher you will be hard to do the right device coating. This tool will help identify the height of the pile and will not damage coating during operation. Now fold along the carpet to a room and fix it in the "roll". You can proceed directly to the device surface. In the center of the room, apply glue, 30-40 cm wide and gently stick the carpet. Once dry, you can continue working.
How to lay carpet - cut the remaining piece in the corner, allowing the wall at the junction of a perfectly smooth joint. Now the entire floor surface plot the glue mixture and fasten cover.
The final stage of laying the carpet rolling stands bonded coating roller, which makes it possible to get rid of excess air. Your cover is ready to entertain you long time!
Category: Repair |
| Rating: 0.0/0|
Total online: 1