20:08How to restore parquet
How to restore the flooring, which for years had lain on the floor in your apartment - it's easy with the grinder! To begin floor should be washed using washing powder or a special tool designed for the care of a wooden surface. |
Once the floors have dried in the presence of nail polish on them - it was removed. Getting rid of the varnish can be made as a solvent and a scraper, and a hair dryer building, which is much easier. Enough to warm up the surface and remove paint product.
The next step in the restoration work appears find possible cracks, bumps - remove defects!
In the case of a shaky planks nailed to studs, hats are carefully utaplivayut to the board. Old wooden coating may issue an unpleasant squeak, which can also be removed. To do this, drill a small hole in the plate, with a diameter of 6-8 mm, and follow the angle of 30-45 degrees and hammered wooden pegs, previously disclosed by the carpenter's glue or PVA glue. With regard to the length of the pin - the excess is removed with a chisel and wood structure is reduced by means of sewing.
How to restore the flooring, what we do next? Now proceed to sand the surface, which is done in three passes. So first use a coarse grind, then the middle and the last stage of polishing the surface of the fine abrasive is carried out.
If after sanding you find cracks or gaps in the floor, they are removed by means of putty for wood, pre-choose colors. The surface is cleaned and wood coatings applied lacquer.
Note that as a varnish for wood flooring is better to prefer imported product manufacturer. This is due to the best quality paint and its resistance to possible mechanical stress.