Main » 2011 August 31 » PP pipe welding
21:42 PP pipe welding | |
| This article presented a brief and clear instructions with photos for welding polypropylene tubes. Follow the step by step photo instructions, and welding of polypropylene pipes with his hands will be not so difficult as it seems. 1. Buy a soldering iron. Approach even the cheapest Turkish pattern. 2. Pipe cutters to cut very convenient. 3. Heat the soldering iron to 270 °, place the ends of the parts into the holes. Exposure time - 5 sec. Fitting since the full (for dvuhsantimetrovyh pipes). 4. Remove the fitting and pipe with a soldering iron and insert one into another. After another 5 seconds. You can let go. 5. After 2 minutes, it becomes a monolithic structure. You can verify this by cutting the weld point. 6. Before you go to shop, paint scheme, as in the photo below. To save yourself from extra trips to the store, buy the materials with a small margin (the tube - on the 2nd. More, tees, couplings, and corners - 2 times greater).  | |
|
| |
| Section categories | ||||||||||||||||||||||||||
|
| Statistics |
Total online: 1 Guests: 1 Users: 0 |
| Login form |
| Search |
| Calendar | ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||